高线电压小瞬时电流实验室检测仪（耐电弧放电实验室检测仪）-（计算出来机管理）

High voltage low current tester (arc resistance tester) - (computer control)

物料品牌：耐电弧试验机

Product name: electric arc resistance tester

产品的型号规格：NDH-A

Product model: NDH - A

足够标准单位：GB/T 1411-2002《胶体绝缘带资料耐高压得很低的工作电流电弧释放电能释放电能的应力测试》（同等IEC  61621-1997）及ASTM D495等标准单位的耍求定制造成的，并非常符合IEC 149、UL 746A等实验室检测的办法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

大部分采用区域及功能性：

本试验台机是确定软件于减速机、电嚣和家里用的电嚣等业的电工作业用可塑料制品、光敏树脂胶胶和隔热电阻漆等隔热电阻装修材质的耐电孤功能认定，主应用于固态物体隔热电阻装修材质如：可塑料制品、聚酰亚胺膜、光敏树脂胶、黑云母、陶瓷厂家、波璃、隔热电阻油、隔热电阻漆、纸壳等媒质的耐电孤功能测式；

本校正机由来医学掌控自动运行，能能屏幕上显示某一状况调查情况下及调查日子，调查收场后并包存某一状况调查的数据，并可网页打印.的标准实验报告范文报告范文。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为左右合二为一结构设计，下处为实际操作软件系统，上侧为应力测试箱。

2 本的产品使用*新智慧保持高技术，使用使用应用程序（IEC或ASTM）可自己确定应力测试，并在手机上彰显做实验的时候阶段和毕竟。

3 **效能健康，抗不干扰技能强，测式要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断事件不确定度：少于 ±10ms

2 调压器容积：2kVA

3 特殊耐压试验相电压：12.5kV

4 实验室检测端电压精确度：±3%

5 直流电压抑制gps精度：±10%  直流电侧量精度等级：1.5%

6 电级对试板心理压力：（0.5±0.05）N

7 金属电极建材：钨棒

8 电极片相应：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 便用环保高温：（23±2）℃

10 食用区域温度：（50±5）%

11 电源开关：220V±5%  50Hz  10A

12 测试    的方式：   国家行业标准/美标/10 mA 持续/20 mA 累计/30 mA不间断/40 mA不间断

13 可靠性试验过程相应：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 车辆型号：

NDH-A    耐脉冲疲劳试验仪-微机控制

NDH-B    耐弧光实验设计仪-摸屏保持

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！